preliminary ? 2002 fairchild semiconductor corporation ds500603 www.fairchildsemi.com october 2001 revised september 2002 NC7SV04 tinylogic ? ulp-a inverter (preliminary) NC7SV04 tinylogic ? ulp-a inverter (preliminary) general description the NC7SV04 is a single inverter from fairchild?s ultra low power-a (ulp-a) series of tinylogic. ulp-a is ideal for applications that require extreme high speed, high drive and low power. this product is designed for a wide low volt- age operating range (0.9v to 3.6v v cc ) and applications that require more drive and speed than the tinylogic ulp series, but still offer best in class low power operation. the NC7SV04 is uniquely designed for optimized power and speed, and is fabricated with an advanced cmos technology to achieve high-speed operation while main- taining low cmos power dissipation. features 0.9v to 3.6v v cc supply operation 3.6v overvoltage tolerant i/o?s at v cc from 0.9v to 3.6v extremely high speed t pd 1.5 ns typ for 2.7v to 3.6v v cc 1.8 ns typ for 2.3v to 2.7v v cc 2.0 ns typ for 1.65v to 1.95v v cc 3.2 ns typ for 1.4v to 1.6v v cc 6.0 ns typ for 1.1v to 1.3v v cc 12 ns typ for 0.9v v cc power-off high impedance inputs and outputs high static drive (i oh /i ol ) 24 ma @ 3.00v v cc 18 ma @ 2.30v v cc 6 ma @ 1.65v v cc 4 ma @ 1.4v v cc 2 ma @ 1.1v v cc 0.1 ma @ 0.9v v cc uses patented quiet series ? noise/emi reduction circuitry ultra small micropak ? leadfree package ultra low dynamic power ordering code: battery life vs. v cc supply voltage tinylogic ulp and ulp-a with up to 50% less power consumption can extend your battery life significantly. battery life = (v battery *i battery *.9)/(p device )/24hrs/day where, p device = (i cc * v cc ) + (c pd + c l ) * v cc 2 * f assumes ideal 3.6v lithium ion battery with current rating of 900mah and derated 90% and device frequency at 10mhz, with c l = 15 pf load tinylogic ? , micropak ? , and quiet series ? are trademarks of fairchild semiconductor corporation. order number package product code package description supplied as number top mark NC7SV04p5x maa05a v04 5-lead sc70, eiaj sc-88a, 1.25mm wide 3k units on tape and reel NC7SV04l6x mac06a f7 6-lead micropak, 1.0mm wide 5k units on tape and reel
preliminary www.fairchildsemi.com 2 NC7SV04 logic symbol ieee/iec pin descriptions function table y = a h = high logic level l = low logic level connection diagrams pin assignments for sc70 (top view) pad assignments for micropak (top thru view) pin names description a input y output nc no connect input output ay lh hl
preliminary 3 www.fairchildsemi.com NC7SV04 absolute maximum ratings (note 1) recommended operating conditions (note 3) note 1: absolute maximum ratings: are those values beyond which the safety of the device cannot be guaranteed. the device should not be oper- ated at these limits. the parametric values defined in the electrical charac- teristics tables are not guaranteed at the absolute maximum ratings. the ? recommended operating conditions ? table will define the conditions for actual device operation. note 2: i o absolute maximum rating must be observed. note 3: unused inputs must be held high or low. they may not float. dc electrical characteristics supply voltage (v cc ) ? 0.5v to + 4.6v dc input voltage (v in ) ? 0.5v to + 4.6v dc output voltage (v out ) high or low state (note 2) ? 0.5v to v cc + 0.5v v cc = 0v ? 0.5v to + 4.6v dc input diode current (i ik ) v in < 0v 50 ma dc output diode current (i ok ) v out < 0v ? 50 ma v out > v cc + 50 ma dc output source/sink current (i oh /i ol ) 50 ma dc v cc or ground current per supply pin (i cc or ground) 50 ma storage temperature range (t stg ) ? 65 c to + 150 c supply voltage 0.9v to 3.6v input voltage (v in ) 0v to 3.6v output voltage (v out ) v cc = 0.0v 0v to 3.6v high or low state 0v to v cc output current in i oh /i ol v cc = 3.0v to 3.6v 24 ma v cc = 2.3v to 2.7v 18 ma v cc = 1.65v to 1.95v 6 ma v cc = 1.4v to 1.6v 4 ma v cc = 1.1v to 1.3v 2 ma v cc = 0.9v 0.1 ma free air operating temperature (t a ) ? 40 c to + 85 c minimum input edge rate ( ? t/ ? v) v in = 0.8v to 2.0v, v cc = 3.0v 10 ns/v symbol parameter v cc t a = + 25 ct a = ? 40 c to + 85 c units conditions (v) min max min max v ih high level 0.90 0.65 x v cc 0.65 x v cc v input voltage 1.10 v cc 1.30 0.65 x v cc 0.65 x v cc 1.40 v cc 1.60 0.65 x v cc 0.65 x v cc 1.65 v cc 1.95 0.65 x v cc 0.65 x v cc 2.30 v cc < 2.70 1.6 1.6 2.70 v cc 3.60 2.0 2.0 v il low level 0.90 0.35 x v cc 0.35 x v cc v input voltage 1.10 v cc 1.30 0.35 x v cc 0.35 x v cc 1.40 v cc 1.60 0.35 x v cc 0.35 x v cc 1.65 v cc 1.95 0.35 x v cc 0.35 x v cc 2.30 v cc < 2.70 0.7 0.7 2.70 v cc 3.60 0.8 0.8 v oh high level 0.90 v cc ? 0.1 v cc ? 0.1 v i oh = ? 100 a output voltage 1.10 v cc 1.30 v cc ? 0.1 v cc ? 0.1 1.40 v cc 1.60 v cc ? 0.2 v cc ? 0.2 1.65 v cc 1.95 v cc ? 0.2 v cc ? 0.2 2.30 v cc < 2.70 v cc ? 0.2 v cc ? 0.2 2.70 v cc 3.60 v cc ? 0.2 v cc ? 0.2 1.10 v cc 1.30 0.75 x v cc 0.75 x v cc i oh = ? 2 ma 1.40 v cc 1.60 0.75 x v cc 0.75 x v cc i oh = ? 4 ma 1.65 v cc 1.95 1.25 1.25 i oh = ? 6 ma 2.30 v cc < 2.70 2.0 2.0 2.30 v cc < 2.70 1.8 1.8 i oh = ? 12 ma 2.70 v cc 3.60 2.2 2.2 2.30 v cc < 2.70 1.7 1.7 i oh = ? 18 ma 2.70 v cc 3.60 2.4 2.4 2.70 v cc 3.60 2.2 2.2 i oh = ? 24 ma
preliminary www.fairchildsemi.com 4 NC7SV04 dc electrical characteristics (continued) ac electrical characteristics symbol parameter v cc t a = + 25 ct a = ? 40 c to + 85 c units conditions (v) min max min max v ol low level 0.90 0.1 0.1 v i ol = 100 a output voltage 1.10 v cc 1.30 0.1 0.1 1.40 v cc 1.60 0.2 0.2 1.65 v cc 1.95 0.2 0.2 2.30 v cc < 2.70 0.2 0.2 2.70 v cc 3.60 0.2 0.2 1.10 v cc 1.30 0.25 x v cc 0.25 x v cc i ol = 2 ma 1.40 v cc 1.60 0.25 x v cc 0.25 x v cc i ol = 4 ma 1.65 v cc 1.95 0.3 0.3 i ol = 6 ma 2.30 v cc < 2.70 0.4 0.4 i ol = 12 ma 2.70 v cc 3.60 0.4 0.4 2.30 v cc < 2.70 0.6 0.6 i ol = 18 ma 2.70 v cc 3.60 0.4 0.4 2.70 v cc 3.60 0.55 0.55 i ol = 24 ma i in input leakage current 0.90 to 3.60 0.1 0.9 a0 v i 3.6v i off power off leakage current 0 10 10 a0 (v i , v o ) 3.6v i cc quiescent supply current 0.90 to 3.60 0.9 5 a v i = v cc or gnd 0.90 to 3.60 5v cc v i 3.6v symbol parameter v cc t a = + 25 ct a = ? 40 c to + 85 c units conditions figure number (v) min typ max min max t phl propagation delay 0.90 12 ns c l = 15 pf, r l = 1 m ? figures 1, 2 t plh 1.10 v cc 1.30 2.0 6 9.0 1.0 13.9 c l = 15 pf, r l = 2 k ? 1.40 v cc 1.60 1.0 3.2 5.1 0.9 6.0 1.65 v cc 1.95 1.0 2.0 4.2 0.7 5.2 c l = 30 pf 2.30 v cc < 2.70 0.8 1.8 2.7 0.6 3.4 r l = 500 k ? 2.70 v cc 3.60 0.7 1.5 2.3 0.5 2.8 c in input capacitance 0 2.0 pf c out output capacitance 0 4.5 pf c pd power dissipation 0.90 to 3.60 10 pf v i = 0v or v cc capacitance f = 10 mhz
preliminary 5 www.fairchildsemi.com NC7SV04 ac loading and waveforms figure 1. ac test circuit figure 2. ac waveforms symbol v cc 3.3v 0.3v 2.5v 0.2v 1.8v 0.15v 1.5v 0.10v 1.2v 0.10v 0.9v v mi 1.5v v cc /2 v cc /2 v cc /2 v cc /2 v cc /2 v mo 1.5v v cc /2 v cc /2 v cc /2 v cc /2 v cc /2
preliminary www.fairchildsemi.com 6 NC7SV04 tape and reel specification tape format for sc70 tape dimensions inches (millimeters) package tape number cavity cover tape designator section cavities status status leader (start end) 125 (typ) empty sealed p5x carrier 3000 filled sealed trailer (hub end) 75 (typ) empty sealed
preliminary 7 www.fairchildsemi.com NC7SV04 tape and reel specification (continued) tape format for micropak tape dimensions inches (millimeters) reel dimensions inches (millimeters) package tape number cavity cover tape designator section cavities status status leader (start end) 125 (typ) empty sealed l6x carrier 5000 filled sealed trailer (hub end) 75 (typ) empty sealed tape size abcdn w1 w2 w3 8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/ ? 0.000 0.567 w1 + 0.078/ ? 0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/ ? 0.00) (14.40) (w1 + 2.00/ ? 1.00)
preliminary www.fairchildsemi.com 8 NC7SV04 physical dimensions inches (millimeters) unless otherwise noted 5-lead sc70, eiaj sc-88a, 1.25mm wide package number maa05a
preliminary 9 www.fairchildsemi.com NC7SV04 tinylogic ? ulp-a inverter (preliminary) physical dimensions inches (millimeters) unless otherwise noted (continued) 6-lead micropak, 1.0mm wide package number mac06a fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and fairchild reserves the right at any time without notice to change said circuitry and specifications. life support policy fairchild ? s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. a critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
|
